The role of the inductance coil
Release time:
2023-09-20
blocking effect
Inductive Coil The self-induced electromotive force in the coil always contends with current changes in the coil. Inductance coil has a blocking effect on AC current. The size of the blocking effect is called inductive reactance xl, and the unit is ohm. Its relationship with inductance l and AC frequency f is xl = 2πfl, and inductors can be mainly divided into high-frequency choke coils and low-frequency choke coils.
Tuning and Frequency Selection
Inductance coil and capacitor in parallel can form lc tuning circuit. That is, if the natural oscillation frequency f0 of the circuit is equal to the frequency f of the non-AC signal, the inductive reactance and capacitive reactance of the loop are also equal, so the electromagnetic energy oscillates back and forth in the inductance and capacitance, which is the resonance phenomenon of the lc loop. At resonance, the inductive reactance and capacitive reactance of the circuit are reversed. The inductive reactance of the total circuit current is the smallest and the current amount is the largest (referring to the AC signal with f = "f0"). The lc resonant circuit has the function of selecting frequency and can select the AC signal with a certain frequency F.
Previous Page
Next Page
Previous Page
Next Page
Latest information
What is the main role of the filter in the power line
As the name suggests, it is a device for filtering waves. "Wave" is a very broad physical concept. In the field of electronic technology, "wave" is narrowly limited to the process of describing the fluctuation of various physical quantities over time. This process is converted into a time function of voltage or current through the action of various sensors, which is called a time waveform of various physical quantities, or a signal.
2023-09-20
Transformer short circuit fault reason
There are many reasons for transformer internal faults and events caused by short circuit at transformer outlet, which are related to structural planning, quality of raw materials, technological level, operating conditions and other factors, but the selection of electromagnetic wire is the key. From the analysis of the transformer in recent years, it can be seen that there are roughly the following reasons for the electromagnetic wire.
2023-09-20
Coil inductance value considerations
The inductance value in the total loop with different connection modes is different. When the four coils are connected in parallel, the inductance value is the smallest and the current in the loop is the largest; when the four coils are in reverse series, the inductance of the loop is the largest and the current of the loop is the smallest. No matter from the analysis of the current flowing through each coil or the energy distributed from the coil, the connection mode of four coils is the most appropriate.
2023-09-20